The DiGidot C4 Live can output to a maximum of 6000 individual LEDs and 2000 RGB LEDs. The LEDs are spread over 4 Outputs, where each can have 3 Universes. Lights can be directly connected to the LED driver. The digital Outputs of the DiGidot C4 Live can all have various settings. You can output both the SPI and DMX signal. Being able to directly connect to LED lights allows the creation of more cost efficient lighting installations. Ethernet nodes and switches are no longer a necessity, since the DiGidot C4 combines those features. Several DiGidot C4s can be connected together and run the lighting installation as one.
The DiGidot C4 is compatible with more than 30 ICs. DiGidot has been active in professional lighting for more 10 years and assures compatibility with 80% of LED lights used in professional lighting. Even if the IC is not yet the list below, we can always make it available.
List of supported LED types (ICs) : APA102, APA104, APA106, BS0901, DM412, GW6205, INK1003, LPD6803, MY9231, PC5XS301V0500, SK6812, SM16703, SM16716, SM16726, TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1904, UCS2903, UCS2904, UCS2912, UCS8904, UCS9812, WS2801, WS2803, WS2811, WS2812, WS2812B, WS2813, WS2818
Change settings from its web-based interface
Whether you use Mac or Windows, the responsive HTML5 interface works on all well known platforms, such as Chrome and Safari. With its clean look and clear explanations at every button it has a minimal learning curve. By typing the standard IP address 10.254.254.254 in your web browser the built-in user interface will help you setup the DiGidot C4 according to your project requirements. You can adjust the number of universes, the type of LED (the LED light IC chip) and route them to a preferred output. Are you using multiple DiGidot C4’s daisy-chained or in a network? Name them the way you want and give them a unique IP address to easily recognize them in your project!
The DiGidot C4 Controller works well with most common LED software used in professional event lighting. The device was thoroughly tested with MADRIX, but we can assure it works well with other software, such as: ArKaos, Chromateq, Pharos and Resolume. Nonetheless, the DiGidot C4 was used numerous times with grandMA consoles.
DiGidot C4 Live 4 > 4 universes > 2048 channels > ~682 RGB Pixels
DiGidot C4 Live 8 > 8 universes > 4096 channels > ~1365 RGB Pixels
DiGidot C4 Live 12 > 12 universes > 6144 channels > ~ 2048 RGB Pixels
|General||Country of origin||The Netherlands|
|HS code||8531 202090|
|Electronics||Input voltage||5 ~ 24V DC|
|Control Characteristics||Output||ArtNet, DMX, SPI(TTL)|
|Dimming Protocol||ArtNet, 0-10V, DMX, Push Button, Wifi|
|Dimming Range||8 bit / 16 bit|
|Operating temperature||0~+50 °C|
|What's in the box?||Box content||LED Driver|
|Package Weight & Dimensions||W x H x D (cm)||7.30 x 2.70 x 15.30|
The DiGidot C4 is a small but powerful LED controller, that suits all kinds of situations. One device drives up to 6144 single LEDs. Furtermore, it supports 30+ IC types and various industry standards. It’s all you need in LED and show control!
Warning: Last items in stock!
Availability date:Add to compare