We've listed the main safety instructions during the installation od LED:
The strip itself and all components may not be mechanically stretched.
Installation may not damage any paths on the strip.
The installation of the LEDs and/or power supplies may only be started when the applicable current installation and electricity standards and other safety instruction are maintained.
It's preferred that the installation is done by a qualified person. If not, make sure that you've read all the available information. If there is any doubt, do not hesitate to contact us!
Be aware of the electrical polarity of the strip. When the polarities are connected the wrong way, the LEDs could get damaged. Parallel connections are recommended, this is a safe connecting method. We advise against serial connections, an unbalanced voltage low can cause overload and could defect the strip.
Make sure that the power supply is able to manage the amount of watts.
With installation on metal or other conductive materials, isolation sheets should be applied in between the material and the strip. Damage because of corrosion is not included in our warranty policy. It's the responsibility of the user to protect the products againt corrosion like codensation and other.
If you have any questions during the installation, contact our technical team!